27
Handling Static Sensitive Devices
NOTICE: Static electricity can damage electronic Ethernet switch system. To avoid damage, keep static-
sensitive Ethernet switches in their static-protective packages until they are ready to be installed. To
reduce the possibility of electrostatic discharge, observe the following precautions:
Limit your movement. Movement can cause static electricity to build up around your person.
Handle the Ethernet switches carefully, holding it by its edges or its frame.
Do not leave the Ethernet switches where others can handle and possibly damage the Ethernet
switch.
While the Ethernet switch is still in its static-protective package, touch it to an unpainted electrically
grounded metal part for at least two seconds. (This drains static electricity from the package and
from your person.)
Remove the Ethernet switch from its package and install it directly into a rack without setting it
down. If it is necessary to set the Ethernet switch down, place it in its static-protective package. Do
not place the Ethernet switches on a metal table.
Take additional care when handling Ethernet switches during cold weather because heating
reduces indoor humidity and increases static electricity.
Package Contents
While unpacking the device, ensure that the following items are included:
•The device
AC power cable
Self-adhesive rubber pads (for on-shelf installation)
Rack-mount kit for installation
Documentation CD
Product Information Guide
Unpacking the Device
To unpack the PowerConnect device:
NOTE: Before unpacking the device, inspect the packaging and report any evidence of damage
immediately to Dell.
NOTE: An ESD strap is not provided, however it is recommended to wear one for the following
procedure.
1
Place the box on a clean flat surface.
2
Open the box or remove the box top.
3
Carefully remove the device from the package and place it on a secure, stable and clean
surface.
4
Remove all packing material.
5
Inspect the device and accessories for damage. Report any damage immediately to Dell.