Starting the Application | Dell PC2748, PC2708, PC2716, PC2724

Table 5-3. PowerConnect Switch Management Buttons

Button	Description

Apply Changes	Applies changes to the Ethernet Switch.
Refresh	Refreshes Ethernet Switch information.
Print	Prints the Network Management System page or table
	information.

Starting the Application

1Open a Web browser.

2Enter the Ethernet Switch IP address (the default IP address is: 192.168.2.1) in the address bar and press <Enter>.

For information about assigning an IP address to the Ethernet Switch, see "Viewing System IP Address."

3When the Enter Network Password window opens, enter a user name and password.

NOTE: The Ethernet switch is configured with a default IP address, user login and password. Activating the Managed Mode button recovers the factory default setting (no password). For information about recovering a lost password, see "Managed Mode Button".

NOTE: Passwords are both case-sensitive and alphanumeric.

4Click OK.

The Dell PowerConnect OpenManage Switch Administrator home page opens.

40

Image 40

Dell PC2748, PC2708, PC2716, PC2724 manual Starting the Application, PowerConnect Switch Management Buttons Description

Contents

User’s Guide October Contents Using the Dell OpenManage Switch Administrator Viewing Statistics Contents System Description IntroductionGigabit Ethernet Ports 24 1-Gigabit Ethernet Ports + 2 SFP Combo ports 16 1-Gigabit Ethernet Ports48 1-Gigabit Ethernet Ports Features General FeaturesHead of Line Blocking Prevention Management Modes Virtual Cable Testing VCT Auto NegotiationJumbo Frames Support AutoMDI/MDIX Support MAC Address Supported Features Layer 2 Features Vlan Supported Features Class of Service CoS Features Ethernet Switch Management Features Port Default SettingsPage Switch Port Configurations Hardware Description PowerConnect 2708 Back Panel PowerConnect 2724 Back Panel PowerConnect 2748 Back Panel Physical Dimensions Power LEDManaged Mode LED LED Definitions Port LEDs Fan LED 2748 only10/100/1000BASE-T Port LEDs Managed Mode Button SFP Port LED Switch Ventilation Fan Cables, Port Connections, and Pinout Information1000BASE-T Cable Requirements RJ-45 Connections for 10/100/1000BASE-T Ports SFP Ports Internal Power Supply Connector Power ConnectorsPin Connections for SFP Interfaces Installation Precautions Installing the Dell PowerConnectOverview Site Requirements SafetyUnpacking Handling Static Sensitive Devices Package ContentsUnpacking the Device Mounting the Device Installing the Device Installing the Device in a Rack Installing the Device on a Flat Surface Installing the Device on a Wall Connecting the Device to AC Power Supply Mounting Device on a Wall Connecting the Device to the Network Back Panel Power Connector Viewing Switch Operation Starting and Configuring the Dell PowerConnectInitial Configuration Login Screen Click Apply Changes Page Using the Dell OpenManage Switch Administrator Understanding the Interface Interface Components Description PowerConnect Switch Management Buttons Using the OpenManage Switch Administrator ButtonsInformation Buttons PowerConnect Switch Management Buttons Description Starting the Application Resetting the Device Reset Displaying Configuration on Demand Defining Switch Information Configuring System InformationViewing the Switch Status Defining Switch Information Viewing System IP Address Updating Static IP Address IP Addressing Configuring Dhcp Client Defining Interface Configuration Interface ConfigurationPage Open the Interface Configuration Configuring the InterfaceViewing Jumbo Frames Creating Vlan Membership Enabling Jumbo Frames Defining Vlan Interface Settings Showing/Creating VLANsRemoving VLANs Open the Vlan Membership Updating the Vlan Interface Settings Configuring LAG MembershipOpen the Vlan Interface Settings Open the LAG Aggregation Configuration Adding a Port to a LAG Managing System Files Downloading Files From Server Downloading Files from Server File Download PowerConnect 2748 Switch Configuration Firmware Download Configuration Download Uploading Files Open the File Upload to Server Copying Files Restoring Company Factory Default Settings Click Restore Company Factory Defaults Click Apply Changes Local User Database Assigning Access Level User RightsOpen the Local User Database Adding a User to the Local User Database Integrated Cable Test for Copper CablesDeleting a User from the Local User Database Open the Integrated Cable Test Running Integrated Cable TestClick Test Now Displaying Optical Transceivers Diagnostics Test Results Optical Transceivers DiagnosticsOpen the Optical Transceiver Diagnostics Port Mirroring Click show AllAdding a Port Mirroring Session Open the Port Mirroring Configuring Storm Control on the PowerConnect Enabling Storm Control Modifying PowerConnect 2708 Storm Control Port Parameters Configuring Storm Control on the PowerConnect 2716/2724 Following describes Storm Control for PowerConnect Modifying PowerConnect 2748 Storm Control Port Parameters Quality of Service QoS Overview Configuring Quality of ServiceVPT Tag Classification Information CoS Services Defining CoS Settings Configuring QoS Settings Configuring the Trust Mode Mapping CoS Values to Queues Mapping a CoS value to a Queue Mapping Dscp Values to QueuesMapping a Dscp value and assigning priority queue Page Viewing Statistics Rmon Statistics Viewing Interface Statistics Open the Rmon Statistics Glossary Class of Service Duplex ModeBroadcast Storm Dhcp Client Flow Control FragmentFrame Gigabit Ethernet Ingress Port IP AddressJumbo Frames Layer Managed Mode MAC LayerMask MulticastPage Startup Configuration SwitchQoS Router Unicast TrunkingWildcard Mask