Delta Electronics PCI-DMC-A01, PCI-DMC-B01

Chapter 3 Operating Principles | PCI-DMC-A01 / PCI-DMC-B01

3-96 Revised March, 2012

2) Start motion card login operation. (SerialNo, Verifykey, Memory Read/Write all

require Check

Password Pass to operate).

Figure 3.130

Password item: Enter two sets of 1~8 bit 0~F hexadecimal values. Default motion

card passwords (Password1: FFFFFFFF Password2:FFFFFFFF).

Status item: If password is correct then “Pass” is displayed in the status below. If

password is wrong, “Failed” appears in the status display.

3) Change motion card password:

Figure 3.131

Change Password item: Enter two sets of 1~8 bit 0~F hexadecimal values.

Repeat item: Enter the two sets of 1~8 bit 0~F hexadecimal values again.

(Same inputs as Change Password).

Change item: Click on Change button to change password. \

Status item: If the passwords entered in Change Password and Repeat are the

same then when the Change button is clicked, the password is successfully

changed and “Pass” appears in the status display. If the passwords entered in

Change Password and Repeat do not match, “Please rewrite it” appears in the

status display, in which case please try Change Password again.