Delta Electronics PCI-DMC-A01, PCI-DMC-B01 20.7 _DMC_01_start_ta_arc2_xy

Chapter 20 2-Axis Arc Interpolation Motion Control API | PCI-DMC-A01 / PCI-DMC-B01
Revised March, 2012 20-15
20.7 _DMC_01_start_ta_arc2_xy
 FORMAT
I16 PASCAL _DMC_01_start_ta_arc2_xy(U16 CardNo, U16* NodeID,U16* SlotID, I32 End_X,
I32 End_Y, F64 Angle, I32 StrVel, I32 MaxVel, F64 Tacc, F64 Tdec)
 Purpose
2-axis arc interpolation motion using absolute coordinates with T-curve velocity cross-section
(Known conditions: endpoint coordinates, angle).
 Parameters
Name Data Type Unit Description
CardNo U16 Number Unit
Node ID of card used for motion displacement
along X-axis and Y-axis
NodeIDArray U16* Number Unit
Holds Node ID sets used for arc interpolation
NodeIDArray[0] holds the 1st set of Node ID
NodeIDArray[1] holds the 2nd set of Node ID
SlotID U16* Number Unit Slot ID
End_X I32 Number of pulses Absolute endpoint X-coordinate on the
specified axis
End_Y I32 Number of pulses Absolute endpoint Y-coordinate on the
specified axis
Angle F64 Degree (°) Set arc angle. One full arc is 360o
StrVel I32
Pulses per
second Starting velocity parameter
MaxVel I32 Pulses per
second Tangential velocity parameter
Tacc F64 Second Specified acceleration time
Tdec F64 Second Specified deceleration time