Denon AVC-A1HD, AVP-A1HD fA-DSXSoundstage, Dynamic Volume, Operating from the main unit, Setting

Dynamic Volume®

Solve the problem of large variations in volume level betweenTV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting.

[Selectable items]

ON : Use Dynamic Volume®.

Dynamic Volume® effect will be at the level of the “Setting”.

OFF : Do not use Dynamic Volume®.

Operating from the main unit

Press DYNAMIC EQ button.

Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF

Dynamic EQ / Volume : OFF

•“Dynamic Volume®” can only be set when Auto Setup has been performed.

•When “MultEQ® XT 32” is set to “OFF” or “Manual”, “Dynamic Volume®” is automatically set to “OFF”.

•Before running Auto Setup and after running Auto Setup, if the number of speakers has increased or you pressed DYNAMIC EQ button, “Run Audyssey” is displayed. In this case, either perform Auto Setup, or return to the setting after running Auto Setup with “Auto Setup” – “Parameter Check” – “Restore” (vpage 22).

NOTE

“Dynamic Volume®” cannot be set in the following situations.

•If “Auto Setup” fails to be completed.

•After running Auto Setup, when the number of used speakers has increased from the number of measured speakers.

Setting

Set Dynamic Volume® effect.

[Selectable items]

Midnight : Most adjustment to loudest and softest sounds.

Evening :Medium adjustment to loudest and softest sound.

Day : Least adjustment to loudest and softest sounds.

•Can be set when “Dynamic Volume®” (vpage 42) is set to “ON”.

• is displayed when set to “Midnight”, “Evening” or “Day”.

•If “Dynamic Volume®” is set to “Yes” in Auto Setup (vpage 20), the setting is automatically changed to “Evening”.

•“Setting” can only be set when Auto Setup has been performed.

NOTE

“Setting” cannot be set in the following situations.

•If “Auto Setup” fails to be completed.

•After running Auto Setup, when the number of used speakers has increased from the number of measured speakers.

•If “Dynamic Volume®” setting is “OFF”.

fA-DSX Soundstage

Adjust Audyssey DSX™ setting and sound stage parameters.

Audyssey DSX™

Provides more immersive surround sound by adding the new channels.

[Selectable items]

ON-Height- : Turn on A-DSX processing for height expansion. ON-Wide- : Turn on A-DSX processing for wide expansion.

OFF : Do not set Audyssey DSX™.

Operating from the main unit or main remote control unit

Press the STANDARD button on the main unit or STD button on the main remote control until “A-DSX” is shown in the display.

Stage Width

Adjust sound stage width when using front wide speakers.

[Variable range] –10 ~ 0 ~ +10

Getting Started Connections Setup Other Operations Multi-Zone Information Troubleshooting Specifications

42