sOption
Make direct mode settings.
Direct Mode
Select MultEQ® XT 32 use for DIRECT or PURE DIRECT mode.
[Selectable items] | ON |
| OFF |
|
|
|
|
dParameter Check
Check Auto Setup measurement results.
This is displayed after the Auto Setup procedure is completed.
[Selectable items]
Spkr Config Check |
| Distance Check |
| Ch. Level Check | |||||
|
|
|
|
|
| ||||
Crossover Check |
|
| EQ Check |
| Restore |
| |||
•If “EQ Check” is selected, press ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to be checked, and then press
ENTER or p.
Use ui to switch the display between the different speakers.
•If “Restore” is selected, all settings are returned to the Auto Setup results (values initially calculated by MultEQ® XT 32) even if each setting was changed manually.
PARAMETER CHECK
Restore | Yes |
Spkr Config Check | No |
Distance Check |
|
Ch.Level Check |
|
Crossover Check |
|
EQ Check |
|
Restore auto setup measurement result
| ⇩ |
RESTORE |
|
Restore | Yes |
| No |
Enter
Restore auto setup measurement result
Getting Started Connections Setup Other Operations
22
