Denon AVP-A1HD, AVC-A1HD gRESTORER, hAudio Delay, Stage Height, About the RESTORER function

Stage Height

Adjust sound stage height when using front height speakers.

[Variable range] –10 ~ 0 ~ +10

•“Audyssey DSX™” can be set when you are using front height speakers or front wide speakers.

•“Audyssey DSX™” is only valid when using a center speaker.

•“Audyssey DSX™” is valid when surround mode is STANDARD mode other than PLgz Height or DTS NEO:X.

•“A-DSX Soundstage” cannot be configured if the HD Audio source being played includes Front height and Front wide channels. In this case, the respective channels are played back using the input signals.

About Audyssey Dynamic Surround Expansion

(A-DSX)

Audyssey DSX™ is a scalable system that adds new speakers to improve surround impression.

Starting with a 5.1 system Audyssey DSX™ firstadds Wide channels for the biggest impact on envelopment. Research in human hearing has proven that information from the Wide channels is much more critical in the presentation of a realistic soundstage than the Back Surround channels found in traditional 7.1 systems. Audyssey DSX™ then creates a pair of Height channels to reproduce the next most important acoustical and perceptual cues. In addition to these new Wide and Height channels, Audyssey DSX™ applies Surround Envelopment Processing to enhance the blend between the front and surround channels.

gRESTORER

This function restores compressed audio signals to how they were before compression and corrects the sense of volume of the bass and treble to obtain richer playback sound.

[Selectable items]

OFF

Mode1 (RESTORER 64)

Mode2 (RESTORER 96)

Mode3 (RESTORER HQ)

The default setting for “NET/USB” and “iPod” is “Mode3”. All others are set to “OFF”.

Operating from the main unit or main remote control unit

During playback, press the RESTORER button on the main unit or the RSTR button on the main remote control unit.

When set to something other than “OFF”, “” is displayed.

OFF		Mode 1		Mode 2
	(RESTORER 64)		(RESTORER 96)
		Mode 3
	(RESTORER HQ)

About the RESTORER function

•Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals.

•This is displayed on the GUI menu and can be set when the input source is set to “NET/USB”, or when analog signals or PCM signals (fs = 44.1/48 kHz) are input.

hAudio Delay

Compensate for mismatched timing between video and audio.

Delay audio.

This sets the delay time for audio signals.

[Variable range] 0ms ~ 200ms

Operating from the main unit or the main remote control unit

b The GUI menu is not displayed when carrying out this setting.

qPress the AUDIO DELAY button on the main unit or A. DL button on

the main remote control unit.

wUse the o p button to set.

•This cannot be adjusted when playing in the EXT. IN, DIRECT or

STEREO mode (with “Crossover Frequency” set to “FIXED–THX–”, “Front” set to “Large”, “Tone Defeat” to “ON” and “MultEQ® XT 32” to “OFF”).

•The adjustment range is 0 to 100 ms when the Auto Lipsync Correction function is activated.

Getting Started Connections Setup Other Operations Multi-Zone Information Troubleshooting Specifications

43