Changed Functions
Support for front height speakers and front wide speakers
Front height or front wide channels can be played back through the FH/FW/AMP
Audyssey MultEQ® XT 32
Audyssey MultEQ® corrects both time and frequency response problems in the listening area so that every listener can enjoy music and movie with the optimum sounds. It performs a fully automated surround system setup. The unit is equipped Audyssey MultEQ® XT 32 that can correct much higher details, particularly in the bass range of the speakers. The high resolution correction reproduces much clearer surround sound.
Direct Mode function (Multi-channel)
When
Surround Back function
When surround back speakers are used and a surround back signal is recorded in the input signal, audio is output automatically from the surround back speakers.
Web Control function
When this product is upgraded, previously saved contents cannot be called.
After completing the upgrade, reconfigure the settings.
For details on the web control operating procedures, see mpage 61
Deleted Functions
Surround B speakers unsupported
As front height speakers and front wide speakers are now supported by this upgrade, surround B speakers can no longer be used.
Audyssey MultEQ® XT
As Audyssey MultEQ® XT 32 is supported by this upgrade, Audyssey MultEQ® XT is deleted.
DTS Neo:6
As DTS Neo:X is supported by this upgrade, DTS Neo:6 is deleted.
Night Mode function
In this upgrade, the night mode in which the volume can be set to low level for listening at nighttime is deleted. The same effect can be obtained from setting “Dynamic EQ®” and “Dynamic Volume®” in the GUI menu (vpage 41) to “ON”.
Mic Select function
The Mic Select function is deleted when the product is upgraded. Only the supplied setup microphone
For details on the items that are added/changed/deleted from the GUI menu, see “GUI Menu Map” (vpage 10, 11).
Getting Started Connections Setup Other Operations
