Denon AVP-A1HD fManual EQ, dAuto Surround Mode, Crossover, Distance FL, Distance FR, Adjust CH

Crossover
	fManual EQ
Select crossover frequency from which subwoofer handles low range
	Adjust tonal quality for each speaker using graphic equalizer.
signal.

Getting

[Selectable items]

THX 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz

150Hz 200Hz 250Hz

Distance FL

Set distance from listening position to front left speaker.

[Variable range] 0.00m ~ 18.00m

Distance FR

Set distance from listening position to front right speaker.

[Variable range] 0.00m ~ 18.00m

dAuto Surround Mode

Make setting for memorizing surround mode setting for each input signal type.

[Selectable items] ON OFF

•The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals

r Multi-channel signals other than Dolby Digital and DTS (PCM, DSD, etc.)

•When playing in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.

Adjust CH

Select speaker adjustment method.

[Selectable items] Each L/R All

Select the speaker and frequency band and adjust the level.

[Selectable items]
63Hz	125Hz		250Hz		500Hz	1kHz	2kHz	4kHz	8kHz
16kHz
[Variable range]
	~			~
–20dB		0dB			+6dB

Curve Copy

Copy MultEQ® XT 32’s “Audyssey Flat” correction curve.

[Selectable items] Yes No

“Curve Copy” is displayed after the Auto Setup procedure has been performed.

Default

Resets the settings to the default values.

Started Connections Setup Other Operations Multi-Zone Information Troubleshooting Specifications

27