Remote Control Unit
When this unit is upgraded, the night mode cannot be set when the NGT button is pressed.
n Main remote control unit (RC-1067)
q HDMI video direct button (NGT)
When this button is pressed, video signals recorded on the BD or DVD are output directly. Video signals input from the HDMI IN terminal are output directly from the HDMI OUT terminal without being processed by this unit.
When the video direct function is on, temporary display in the GUI menu cannot be used.
NOTE
When using 3D video devices that transmit radio communication signals (such as infrared signals etc) between the various units (such as the monitor, 3D
q glasses, 3D transmitter unit etc), the remote control unit may not operate due to interference from those radio communication signals. If this occurs, adjust the direction and distance of the 3D communication for each unit, and check that the remote control unit operation is not affected by these signals.
Connections
Speaker Installation
Speaker Layout
When this unit is upgraded, the speaker configurations supported by this unit change.
The table below shows a typical speaker configuration for the unit.
Speaker | FRONT |
| SURROUND | SURROUND BACK | FRONT | FRONT | SUBWOOFER | |||||||
| CENTER | HEIGHT | WIDE | |||||||||||
|
|
|
|
|
|
|
| (b2) | ||||||
Configuration | L | R |
| L | R | L | R | 1 only | L | R | L | R | ||
|
| |||||||||||||
S | S | S | S | S | S | S | – | S | S | – | – | S | ||
– | – | S | S | |||||||||||
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
| S | S |
| – | – | – | – |
| |
S | S | S | S | S |
|
| – | S | S | S | ||||
– | – |
|
| |||||||||||
|
|
|
|
|
|
| – | – | S | S |
| |||
|
|
|
|
|
|
|
|
|
| |||||
S | S | S | S | S | – | – | S | – | – | – | – | S | ||
S | S | S | S | S | – | – | – | – | – | – | – | S | ||
S | S | S | – | – | – | – | – | – | – | – | – | S | ||
S | S | – | – | – | – | – | – | – | – | – | – | S | ||
S | S | – | – | – | – | – | – | – | – | – | – | – | ||
b1 To perform the 9.1 channel playback using front height speakers or front wide speakers, a separate power amplifier (sold separately) is required.
b2 The unit can be connected to a maximum of 3 subwoofers.
Getting Started Connections Setup Other Operations
