Playback

1 Press ZONE2 to switch the zone mode to the ZONE2.

ZONE2 lights.

2 Press POWER X to turn on the

ZONE2 power.

The indicator on the display lights.

Also press input source select button when in standby mode, the power turns on.

When POWER X is pressed, ZONE2 turns off.

Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit.

3 Press the input source select button to select the input source to be played.

The audio signal of the selected source is output to ZONE2.

To perform an operation with the main unit, press ZONE2/REC SOURCE many times. Each time you press ZONE2/REC SOURCE, the input source changes.

Input source select buttons

Adjusting the volume

Use VOLUME df to adjust the volume.

GAdjustable rangeH

0 – 40

– 98

 

 

 

 

(When the “Scale” (

vpage

108) setting is “0 –

98”)

 

 

 

 

 

 

GAdjustable rangeH

– – –

 

–79dB–40dB – 18dB

 

(When the “Scale” (

vpage

 

108) setting is “–79.5dB

– 18.0dB”)

At time of purchase, “Volume Limit” (vpage 131) is set to “70 (–10dB)”.

Turn MASTER VOLUME after pressing ZONE2 ON/OFF on the main unit to adjust the sound volume.

Turning off the sound temporarily

Press MUTE :.

The sound is reduced to the level set at “Mute Level” (vpage 131) in the menu.

To cancel, either adjust the volume or press MUTE : again.

The setting can also be cancelled by adjusting the volume or turning off the ZONE2 power.

Sleep timer function

This is convenient for viewing and listening while going to sleep in ZONE2.

The sleep timer function can be set by zone.

1Press ZONE2 to switch the zone

mode to the ZONE2.

ZONE2 lights.

2 Press SLEEP and display the time you want to set.

The time switches as shown below each time SLEEP is pressed.

Off 10 min 20 30 40 50

120 110 100 90 80 70 60

To confirm the countdown time before putting the unit to sleep

Press SLEEP.

“Z2 Sleep : zmin” appears on the display. zz Countdown time

To cancel the sleep timer

Press SLEEP to set “Off”.

version Basic

version Advanced

Informations

When power for both MAIN ZONE and ZONE2 is set to ON, power of the MAIN ZONE only can be turned off. In Step 1, press MAIN and POWER X in this order.

DVD

You can adjust the tone and volume for ZONE2 in “ZONE2 Setup” (vpage 131) in the menu.

98

The sleep timer is also cancelled when this unit is set to the standby mode or the ZONE2 power is turned off.

NOTE

The sleep timer function cannot turn off the power of devices connected to this unit. To turn off the power of those connected devices, set up sleep timers on the connected devices themselves.