
HDMI control function
If the HDMI control function does not operate properly, check the following points.
•Is the TV or player compatible with the HDMI control function?
•Is “HDMI Control” (vpage 113) set to “On”?
•Is “Power Off Control” (vpage 113) set to “All” or “Video”?
•Is “Control Monitor” (vpage 113 set for the monitor output connected to television?
•Is the “Control Monitor” setting (vpage 113) of the menu set to the TV that uses the HDMI control function when this unit is connected to two TVs that support HDMI connectors?
•Are the HDMI control function settings of all devices correct?
NOTE
•When “HDMI Control” is set to “On”, it consumes more standby power.
•The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.
•Some functions may not operate depending on the connected TV or player. Check the owner’s manual of each device for details beforehand.
•When “Power Off Control” on the menu is set to “Off” (vpage 113), this unit is not set to standby even if the connected device is in the standby mode.
•When connection changes are implemented, such as adding connections to HDMI devices, linked operations may be initialized. In this case, you will need to reconfigure the settings.
•When “HDMI Control” is set to “On”, it is not possible to assign an HDMI connector to “TV AUDIO” at “Input Assign” (vpage 117).
•Should any of the operations below be performed, the interlocking function may be reset, in which case, repeat steps 2 and 3.
•“Input Assign” – “HDMI” (vpage 117) setting has changed.
•“Video Output” (vpage 112) setting is changed.
•There is a change to the connection between the devices and the HDMI, or an increase in devices.
Sleep timer function
•You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep.
•The sleep timer function can be set for each zone (vpage 98 “Sleep timer function”). (The MAIN ZONE setting method is explained here.)
1Press MAIN to switch the zone mode to the MAIN ZONE.
MAIN lights.
2Press SLEEP and display the time
you want to set.
The indicator on the display lights.
• The time switches as shown below each time SLEEP is pressed.
Off 10 min
20
30
40
50
120 110
100
90
80
70
60
Press SLEEP.
“Sleep : zmin” appears on the display. zz Countdown time
To cancel the sleep timerPress SLEEP to set “Off”.
The indicator on the display turns off.
•The sleep timer setting is canceled if this unit’s power is set to standby.
•The sleep timer function can be set separately for the different zones (vpage 98 “Sleep timer function”).
version Basic
version Advanced
Informations
NOTE
The sleep timer function cannot turn off the power of devices connected to this unit. To turn off the power of those connected devices, set up sleep timers on the connected devices themselves.
DVD | 92 |