Video

Info Display

Default settings are underlined.

Displays status of operation temporarily when the sound mode is changed, or input source is switched. You can set whether or not to show each of these status displays.

Setting items

Setting details

 

 

On-screen Info

On : Turn display on.

 

Off : Turn display off.

Audio Display

Default settings are underlined.

 

 

Sets how long each menu is displayed when the input source is “NETWORK”, “iPod/USB”, or “FM”.

Setting items

Setting details

 

 

Audio

Always : Show display continuously.

 

30s : Show display for 30 seconds after operation.

 

10s : Show display for 10 seconds after operation.

 

Off : Turn display off.

TV Format

Default settings are underlined.

Set the video signal format to be output for the TV you are using.

Setting items

Setting details

 

 

Format

NTSC : Select NTSC output.

 

PAL : Select PAL output.

“Format” can also be set by the following procedure. However, the menu screen is not displayed.

1.Press and hold the main unit’s ZONE2/REC SOURCE and STATUS for at least 3 seconds.

“V.Format : <PAL>” appears on the display.

2.Use the main unit’s TUNER PRESET CH +, – and set the video signal format.

3.Press the main unit’s STATUS to complete the setting.

NOTE

When a format other than the video format of the connected TV is set, the picture will not be displayed properly.

DVD

115

version Basic

version Advanced

Informations