Speaker connection

Connecting 6.1-channel speakers using one surround back speaker

If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal. For speaker settings in this case, see “When 6.1ch speakers are installed” (vpage 79).

To perform 6.1-channel playback using the surround back speaker, set “Assign Mode” to “Surround Back” in steps 3 to 5 for “Set up “Amp Assign”” (vpage 89).

Also use the “Speaker Config.” setting (vpage 123) to set “Surr. Back” to “1spkr”.

Cables used for connections

Audio cable (sold separately)

Speaker cable

Subwoofer cable

NOTE

For speaker cable connections, see page 80.

For speaker impedance , see page 80.

FL SW

FR

 

C

SL

SR

SB

DVD

84

Informations version Advanced version Basic