Setting items | Setting details |
|
|
Speaker Config. | Surr. Back : Set the presence, size and number of surround back speakers. |
(Continued) | • Large : Use a large speaker that can adequately play back low |
| frequencies. |
| • Small : Use a small speaker that has inadequate playback capacity for |
| low frequencies. |
| • None : Select when the surround back speakers are not connected. |
| • 2spkrs : Use two surround back speakers. |
| • 1spkr : Use only one surround back speaker. When you select this |
| setting, connect the surround back speaker to the left (L) channel. |
| NOTE |
| When “Assign Mode” setting (vpage 122) is “Surround Back”, you |
| can make the “Surr. Back” setting. |
Front Height : Set the presence and size of the front height speakers.
•Large : Use a large speaker that can adequately play back low frequencies.
•Small : Use a small speaker that has inadequate playback capacity for low frequencies.
•None : Select when the front height speakers are not connected.
NOTE
When “Assign Mode” setting (vpage 122) is “Front Height”, you can make the “Front Height” setting.
Front Wide : Set the presence and size of the front wide speakers.
•Large : Use a large speaker that can adequately play back low frequencies.
•Small : Use a small speaker that has inadequate playback capacity for low frequencies.
•None : Select when the front height speakers are not connected.
NOTE
When “Assign Mode” setting (vpage 122) is “Front Wide”, you can make the “Front Wide” setting.
| Speakers |
|
|
Setting items | Setting details |
|
|
Bass | Subwoofer Mode : Select low range signals to be reproduced by |
Set subwoofer and LFE | subwoofer. |
signal range playback. | • LFE : The low range signal of the channel set to “Small” speaker size is |
| added to the LFE signal output from the subwoofer. |
| • LFE+Main : The low range signal of all channels is added to the LFE |
| signal output from the subwoofer. |
| • “Subwoofer Mode” can be set when “Speaker Config.” – “Subwoofer” |
| (vpage 122) is set to “Yes”. |
| • Play music or a movie source and select the mode offering the strongest |
| bass. |
| • Select “LFE+Main” if you want the bass signals to always be produced |
| from the subwoofer. |
| NOTE |
| If “Front” and “Center” for “Speaker Config.” are set to “Large”, and |
| “Subwoofer Mode” is set to “LFE”, no sound may be output from the |
| subwoofers, depending on the input signal or selected sound mode. |
LPF for LFE : Set LFE signal playback range. Set this when you want to change the playback frequency of the subwoofer.
•80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
vSee overleaf
version Basic
version Advanced
Informations
DVD | 123 |