Language

Default settings are underlined.

Set the language for display on the menu screen.

Setting details

English / Deutsch / Français / Italiano / Español / Nederlands / Svenska

“Language” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting.

1.Press and hold the main unit’s ZONE2/REC SOURCE and STATUS for at least 3 seconds. “V.Format : <PAL>” appears on the display.

2.Press the main unit’s DIMMER and set “Lang. : <ENGLISH>”.

3.Use the main unit’s TUNER PRESET CH +, – and set the language.

4.Press the main unit’s STATUS to complete the setting.

ZONE2 Setup

Default settings are underlined.

Set the audio to play back with ZONE2.

“ZONE2 Setup” is displayed when “ZONE2” is selected with “Assign Mode” (vpage 122).

Setting items

Setting details

Bass

–10dB – +10dB (0dB)

Adjust bass tones.

 

Treble

–10dB – +10dB (0dB)

Adjust treble tones.

 

High Pass Filter

On : The low range is attenuated.

Make settings for cutting

Off : The low range is not attenuated.

the low range to reduce

 

distortion in the bass.

 

Lch Level

–12dB – +12dB (0dB)

Adjust the left channel

 

output level.

 

Rch Level

–12dB – +12dB (0dB)

Adjust the right channel

 

output level.

 

Channel

Stereo : Select stereo output.

Set the signal output from

Mono : Select monaural output.

multi-zone.

 

 

General

 

 

Setting items

Setting details

Volume Level

Variable : Volume adjustment is enabled by main unit and remote control

Set the volume output level.

unit.

 

40 (–40dB) : Fix volume at –40 dB. Set when adjusting volume by external

 

amplifier.

 

80 (0dB) : Fix volume at 0 dB. Set when adjusting volume by external

 

amplifier.

 

When “Assign Mode” (vpage 122) is set to “ZONE2”, the

 

“Volume Level” setting is automatically set to “Variable”.

Volume Limit

Off : Do not set a maximum volume.

Make a setting for

60 (–20dB) /70 (–10dB) /80 (0dB)

maximum volume.

This is displayed from –79 dB to 18 dB when “Scale” (vpage 108)

 

 

is set to “–79.5dB – 18.0dB”.

Power On Volume

Last : Use the memorized setting from the last session.

Define the volume setting

Mute : Always mute when power is turned on.

that is active when the

1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.

power is turned on.

This is displayed from –79 dB to 18 dB when “Scale” (vpage 108)

 

 

is set to “–79.5dB – 18.0dB”.

Mute Level

Full : The sound is muted entirely.

Set the amount of

–40dB : The sound is attenuated by 40 dB down.

attenuation when muting

–20dB : The sound is attenuated by 20 dB down.

is on.

 

Zone Rename

Change the display title of each zone to one you prefer.

Setting details

MAIN ZONE / ZONE2

Up to 10 characters can be input.

For character input, see page 103.

version Basic

version Advanced

Informations

DVD

131