Denon AVR-2313 Manual Setup

Manual Setup Default settings are underlined.

Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.

•If you change the speaker settings after performing Audyssey® Setup, it will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 108).

•“Manual Setup” can be used without changing the settings. Please set if necessary.

Setting items	Setting details
Amp Assign	Assign Mode : Set the assignment mode.
Select power amplifier	• Surround Back : Setting for 7.1-channel playback using surround back
usage method to match	speakers.
your speaker system.	• ZONE2 : Setting to assign the unit’s built-in power amplifier for ZONE2
	and output the audio in stereo.
	• Bi-AMP : Setting to use the front speakers via the bi-amp connection.
	• Front B : Setting to use the second set of front speakers for playback.
	You can switch the front speakers A and B to be used for playback in
	accordance with the 2-channel playback or multi-channel playback mode.
	When you select this Front B setting, also perform the “Front Speaker
	Setup” (vpage 125) procedure.
	• Front Height : Setting for 7.1-channel playback using front height
	speakers.
	• Front Wide : Setting for 7.1-channel playback using front wide speakers.
Speaker Config.	Front : Set the front speaker size.
Indicate speaker presence	• Large : Use a large speaker that can adequately play back low
and select speaker size	frequencies.
categories based on bass	• Small : Use a small speaker that has inadequate playback capacity for
reproduction capability.	low frequencies.

	Speakers
Setting items	Setting details
Speaker Config.	Center : Set the presence and size of the center speaker.
(Continued)	• Large : Use a large speaker that can adequately play back low
	frequencies.
	• Small : Use a small speaker that has inadequate playback capacity for
	low frequencies.
	• None : Select when a center speaker is not connected.
	“Large” is not displayed when “Front” is set to “Small”.
	Subwoofer : Set the presence of a subwoofer.
	• Yes : Use a subwoofer.
	• No : Select when a subwoofer is not connected.
	When “Front” is set to “Small”, “Subwoofer” is automatically set to
	“Yes”.
	Surround : Set the presence and size of the surround speakers.
	• Large : Use a large speaker that can adequately play back low
	frequencies.
	• Small : Use a small speaker that has inadequate playback capacity for
	low frequencies.
	• None : Select when the surround speakers are not connected.
	• When “Surround” is set to “Large”, “Surr. Back”, “Front Height” and
	“Front Wide” can be set to “Large”.
	• When “Surround” is set to “None”, “Surr. Back”, “Front Height” and
	“Front Wide” are automatically set to “None”.

version Basic

version Advanced

Informations

NOTE

Do not use the outward shape of the speaker to determine selection of a “Large” or “Small” speaker. Instead, use the frequencies set in “Crossovers” (vpage 125) as the standard for determining bass reproduction capability.

•When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.

•When “Front” is set to “Small”, “Center”, “Surround“, “Surr. Back”, “Front Height” and “Front Wide” can not be set to “Large”.

v See overleaf

DVD 122