Quick Select Names

Change the “Quick Select” display title to one you prefer.

Setting details

Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4

Up to 16 characters can be input.

For character input, see page 103.

Trigger Out

Selects when to activate trigger out.

For details about how to connect the TRIGGER OUT jack, see “TRIGGER OUT jack” (vpage 23).

Setting details

nn When setting for zone (MAIN ZONE / ZONE2)

Trigger out is activated through linkage to the power of the zone set to “On”.

nn When setting for input source

Activate trigger out when the input source set to “On” is selected.

Active for the zone set to “On” with “When setting for zone”.

nn When setting for HDMI monitor

Activate trigger out when the HDMI monitor set to “On” is selected.

Activate trigger out when the HDMI monitor set to “On” is selected. Active when the “MAIN ZONE” set to “On” with “When setting for zone” is selected, and when the input source set to “On” with “When setting for input source” is selected.

On : Activate trigger on this mode.

– – : Do not activate trigger on this mode.

 

General

Auto Standby

Default settings are underlined.

When you do not perform any operation on this unit with no audio or video input for a specified time, this unit automatically enters the standby mode. Before it enters the standby mode, “Auto Standby” is displayed on the display of this unit and the menu screen.

Setting details

30min : The unit goes into standby after 30 minutes.

60min : The unit goes into standby after 60 minutes.

Off : The unit does not go into standby automatically.

Front Display

Default settings are underlined.

Adjust the display brightness of this unit.

Setting items

Setting details

 

 

Dimmer

Bright : Normal display brightness.

 

Dim : Reduced display brightness.

 

Dark : Very low display brightness.

 

Off : Turns the display off.

Buttons on the main unit can be used for operations.

Each time DIMMER is pressed, the setting is changed as shown below.

Bright

 

 

Dim

 

 

Off

 

 

 

Dark

 

 

 

NOTE

When “Dimmer” is set to “Off”, the display turns off and appears as if there is no electricity.

version Basic

version Advanced

Informations

DVD

132