Setting items | Setting details | |
|
| |
Delay Time | 0ms – 300ms (30ms) | |
Adjust the audio delay time |
| |
against video to extend the |
| |
sound field image. You can |
| |
set this when the sound |
| |
mode is “MATRIX”. |
| |
Effect Level | 1 – 15 (10) | |
Adjust the sound effect | Set to a lower level if the positioning and sense of phase of the | |
level. You can set this when | ||
surround signals seems unnatural. | ||
the sound mode is original | ||
| ||
listening mode. |
| |
Room Size | Small : Simulate acoustics of a small room. | |
Determine size of acoustic | Medium small : Simulate acoustics of a | |
environment. You can set | Medium : Simulate acoustics of a medium room. | |
this when the sound mode | Medium large : Simulate acoustics of a | |
is original listening mode. | Large : Simulate acoustics of a large room. |
| NOTE |
| “Room Size” does not indicate the size of the room in which sources are |
| played. |
Height Gain | Low : Reduce the front height channel volume. |
Control the front height | Normal : Front height channel sound is output with standard sound |
channel volume. | volume. |
| High : Increase the front height channel volume. |
NOTE
“Height Gain” is displayed for the following settings.
• When “Assign Mode” (vpage 122) is set to “Front Height”.
• When the “Speaker Config.” – “Front Height” setting (vpage 123) is set other than to “None”.
• When sound mode is “PLgz” or the PLgz decoder is used.
Setting items | Setting details | |
Set Defaults | Yes : Reset to the defaults. | |
The “Surround Parameter” | No : Do not reset to the defaults. | |
settings are returned to the | When you select “Set Defaults” and press | |
default settings. | ||
ENTER, the “Reset to the default values?” | ||
| ||
| prompt is displayed. Select either “Yes” or | |
| “No”, and press ENTER. |
Audio
version Basic
version Advanced
Informations
DVD | 106 |