REC OUT mode
•When using the audio/video recording connectors (MEDIA PLAYER outputs), you can record the audio or video from a different program source while listening to the currently played track.
•For the connection method, see “Connecting a media player” (vpage 18).
1Press ZONE2 / REC SOURCE until “RECOUT SOURCE” is displayed.
Press ZONE2 / REC SOURCE to choose the input | ||||||
2 source to be recorded. |
|
|
| |||
ZONE2 SOURCE |
| ZONE2 CBL/SAT |
| ZONE2 DVD | ||
|
| |||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| ···· | ||
···· |
|
| ||||
RECOUT DVD 
RECOUT CBL/SAT 
RECOUT SOURCE
3 Start recording.
•For operating instructions, refer to the respective device’s operating instructions.
•To cancel, press ZONE2 / REC SOURCE until “ZONE2 SOURCE” is displayed.
•Make a test recording before starting the actual recording.
•The digital signal input into the HDMI, COAXIAL and OPTICAL connectors is not output from the analog REC OUT connector.
•Sources selected with the REC OUT mode are output from ZONE2 as well.
•The operable buttons on the remote control unit in REC OUT mode while it is in the operating mode for ZONE2 are as follows:
•ZONE SELECT buttons
•MUTE button (:)
•VOLUME button (df)
NOTE
•Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder.
•Input sources for which “Hide” is selected at “Hide Sources” (vpage 119) cannot be selected.
•To record video signals through this unit, use the video cable for connection between this unit and the player.
version Basic
version Advanced
Informations
DVD | 94 |