Specifications
nn Audio section
• Power amplifier |
|
|
Rated output: | Front: |
|
| 105 | W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) |
| 135 | W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) |
| Center: | |
| 105 | W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) |
| 135 | W (6 Ω, 1 kHz with 0.7 % T.H.D.) |
| Surround: | |
| 105 | W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) |
| 135 | W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) |
| Surround back: | |
| 105 | W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) |
| 135 | W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) |
Output connectors: | 6 – 16 Ω | |
• Analog |
|
|
Input sensitivity/Input impedance: | 200 mV/47 kΩ | |
Frequency response: | 10 Hz – 100 kHz — +1, | |
S/N: | 100 dB | |
• Digital |
|
|
D/A output: | Rated output — 2 V (at 0 dB playback) | |
| Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) | |
| S/N ratio — 102 dB | |
| Dynamic range — 100 dB | |
Digital input: | Format — Digital audio interface | |
nn Tuner section |
| [FM] |
| (Note: μV at 75 Ω, 0 dBf = 1 x | |
Receiving Range: | 87.5 MHz – 108.0 MHz | |
Usable Sensitivity: | 1.2 μV (12.8 dBf) | |
50 dB Quieting Sensitivity: | MONO | 2.8 μV (20.2 dBf) |
S/N : | MONO | 70 dB |
| STEREO | 67 dB |
Total harmonic Distortion: | MONO | 0.7 % (1 kHz) |
| STEREO | 1.0 % (1 kHz) |
nn General |
|
|
Power supply: | AC 230 V, 50/60 Hz | |
Power consumption: | 600 W |
|
Power consumption in standby mode: | 0.1 W |
|
Power consumption in CEC standby mode: | 0.5 W |
|
Power consumption in network standby mode: | 2.7 W |
|
For purposes of improvement, specifications and design are subject to change without notice.
version Basic
version Advanced
Informations
nn Video section
•Standard video connectors Input/output level and impedance: Frequency response:
•Color component video connector Input/output level and impedance:
1
5 Hz – 10 MHz — 0,
Y (brightness) signal — 1
PR / CR signal — 0.7
Frequency response: | 5 Hz – 60 MHz — 0, |
DVD | 159 |