Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

Antenna terminals

An F-type FM antenna cable plug can be connected directly.

AM/FM

 

Direction of broadcasting station

 

AM loop antenna

FM antenna

 

(small, supplied)

 

(White)

(Black)

75 Ω/ohms

 

 

 

 

Coaxial cable

FM indoor

antenna

(supplied)

AM outdoor antenna

Ground

 

HD Radio™ broadcast

HD Radio broadcast is a service that is only available within the United States.

Direction of broadcasting station

 

AM loop antenna

FM antenna

(large, for HD Radio broadcasting, supplied)

• To prevent interference, install at least 3.3 feet/

 

 

1 m away from the antenna connected to the

 

AVR-5308CI’s other AM tuner terminal.

75 Ω/ohms

(White)

 

Coaxial cable

 

 

(Black)

FM indoor antenna (dipole, for HD Radio broadcasting, supplied)

AM outdoor antenna

Ground

Connection of AM antennas

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

AM loop antenna assembly

Remove the vinyl tie and take out the connection line.

a. With the antenna on top of any stable surface.

Connect to the AM antenna terminals.

Bend in the reverse direction.

b. With the antenna attached to a wall.

1. Push the

2. Insert the

3. Return the

lever.

conductor.

lever.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

• Do not connect two FM antennas simultaneously.

•Even if an external AM antenna is used, do not disconnect the AM loop antenna.

•Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.

Mount

21

Installation hole Mount on wall, etc.