Remote Control Unit Operations

Operating DENON Audio Components

1Press [MODE SELECTOR] for the component to be operated.

The indicator for the component to be operated flashes.

Presetting

The included main remote control unit can be preset to operate devices of various brands.

1Press [MODE SELECTOR] for the device you want to

Main Remote Control Unit

• On the main remote control unit, the display switches according

to the device being operated and the mode.

 

• In modes other than iPod, the mode switches between“

”

and “

” each time the [MODE SELECTOR] is pressed.

 

• In the AMP, TUNER, NET/DTU and iPod modes, when the remote

ID is set, the AVR-5308CI can be used independently even in an

: AMP / ZONE2 / ZONE3 / ZONE4 /

SYSTEM CALL

: TUNER (FM/AM) / XM

: NETWORK/USB /

DIGITAL TUNER (HD Radio)

: Satellite Receiver / Cable TV

: iPod

: DVD player (recorder) /

CD player (recorder) : VCR / TAPE

: TV

preset.

2Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.

Press [NUMBER] and input the 5-digit number of the

3brand of the component to be preset. The numbers

are shown in the Preset Code Table (

End of this

environment containing multiple DENON amplifiers.

b The mode switches each time [AMP] is pressed.

v

manual).

Playback Setup Connections Started Getting

[AMP]

Signal transmission indicator

[MODE SELECTOR

When the code is registered, the signal transmission indicator flashes twice.

When the preset code is transmitted, the mode indicator for the component to which that code belongs flashes.

b The input mode is canceled if no button is operated for 10 seconds.

Some brands have more than one preset code. If the component does not operate, try inputting a different code.

Zone-Multi Control Remote

 

GSYSTEM CALL modeH

GZONE4 modeH

Operating Preset Components

 

 

 

Press [MODE SELECTOR] for the component to be

[HOME]

 

 

1operated.

 

 

 

The mode indicator of the device to be operated flashes.

[NUMBER]

 

 

2Operate the component.

[RC SETUP]

2Operate the component.

 

b For details, refer to the component’s operating instructions.

 

 

 

b For details, refer to the component’s operating instructions.

Troubleshooting Information

Depending on the model and year of manufacture of your equipment, some buttons may not operate.

NOTE

The device mode (“” or “”) cannot be changed while the setting is being made.

[HOME] is used to return to the AMP mode (AMP, ZONE2, ZONE3, ZONE4 or SYSTEM CALL) when in any mode other than AMP.

76