Getting

 

dRoom EQ

 

fDynamic EQ

 

Select room equalizer for current environment.

 

Make Dynamic EQ settings.

 

 

 

 

About the RESTORER function

• Such compressed audio formats as MP3, WMA (Windows Media

Audio) and MPEG-4 AAC reduce the amount of data by eliminating

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started

[Selectable items]

Audyssey : Optimize frequency response of all speakers.

Audyssey Byp. L/R : Optimize frequency response of speakers except front L and R speakers.

Audyssey Flat

: Optimize frequency response of all speakers to

 

flat response.

 

 

Manual

: Apply frequency response set with “Manual

 

EQ” (vpage 35).

 

 

OFF

: Turn equalizer off.

 

 

Operating from the main unit or main remote control unit

Press the ROOM EQ button on the main unit or the EQ button on the main remote control.

OFF Audyssey Audyssey Byp. L/R

Manual Audyssey Flat

When “Audyssey” is selected, “” lights.

When “Audyssey Byp. L/R” or “Audyssey Flat” is selected, or when

the auto setup measuring results have changed, “” lights.

•“Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be selected after the auto setup procedure has been performed.

•If the settings of the speakers for which “None” has been determined at “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” cannot be selected and measurements have to be taken again to include the newly-added speakers.

•When using headphones, “Room EQ” is always set to “OFF”.

[Selectable items]

ON

 

OFF

Operating from the main unit

Press the DYNAMIC EQ button.

•“Dynamic EQ” is displayed when selecting “Audyssey”, “Audyssey Flat” or “Audyssey Byp.L/R” in the “Room EQ” setup. When set to

“ON”, the “” indicator is lit.

•When the audio setup measuring results have changed, ““ lights.

gRESTORER

This function restores compressed audio signals to how they were before compression and corrects the sense of volume of the bass and treble to obtain richer playback sound.

[Selectable items]

OFF

Mode1 (RESTORER 64)

Mode2 (RESTORER 96)

Mode3 (RESTORER HQ)

The default setting for “NET/USB” and “iPod” is “Mode3”. All others are set to “OFF”.

Operating from the main unit or main remote control unit

During playback, press the RESTORER button on the main unit or the RSTR button on the main remote control unit.

When set to something other than “OFF”, “” is displayed.

 

OFF

 

 

Mode 1

 

 

Mode 2

 

 

 

(RESTORER 64)

(RESTORER 96)

 

 

 

 

Mode 3

 

 

 

 

 

 

 

 

 

 

 

 

(RESTORER HQ)

 

 

 

signal components that are hard for the human ear to hear. The

RESTORER function generates the signals eliminated upon

compression, restoring the sound to conditions near those of the

original sound before compression. It also corrects the sense of

volume of the bass to obtain richer sound with compressed audio

signals.

• This is displayed on the GUI menu and can be set when the input

source is set to “XM”, “HD Radio” or “NET/USB”, or when analog

signals (including AM/FM signals) or PCM signals (fs = 44.1/48

kHz) are input.

hNight Mode

Optimized setting for late-night listening.

[Selectable items]

OFF

 

Low

 

Middle

 

High

 

 

 

 

 

 

 

 

Operating from the main unit or main remote control unit

Press the NIGHT button on the main unit or the NGT button on the main remote control unit.

The “” indicator lights when “Low”, “Middle” or “High” is selected.

OFF Low Middle

High

53