QUICK SELECT

CH SELECT uiop

Channel Level

You can adjust the channel level either according to the playback sources or to suit your taste, as described below.

1Press CH SELECT.

2Use ui or CH SELECT to select the speaker.

The speaker that can be set switches each time one of the buttons is pressed.

3Use o p to adjust the volume.

b ”OFF” can be set by pressing o when the subwoofer’s volume is set to -12dB.

Quick Select Function

With this function, the currently playing input source, input mode, surround mode, room EQ settings and volume can be stored in the memory.

1Set the input source, input mode, surround mode, room EQ settings and volume to the conditions you want to store.

2Press and hold the desired QUICK SELECT.

Keep pressing the button until the quick select indicator lights.

[Quick Select Defaults]

 

Input Source

Volume

Quick Select 1

DVD

–40 dB

Quick Select 2

TV/CBL

–40 dB

Quick Select 3

VCR

–40 dB

Remote Playback Setup Connections Started Getting

QUICK SELECT

uiop

CH SELECT

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

Fader Function

This function lets you adjust (fade) the sound from all the front or rear speakers at once.

1Press CH SELECT.

2Press ui or CH SELECT to select “Fader”.

3Use o p to adjust the volume of the speakers. (o: front, p: rear)

•The fader function does not affect the subwoofer.

•The fader can be adjusted until the volume of the speaker adjusted to the lowest value is –12 dB.

•To call out the settings, press QUICK SELECT at which the desired settings were stored.

•The Quick Select name can be changed (vpage 40).

NOTE

Input sources stored with the quick select function cannot be selected if they have been deleted at GUI menu “Manual Setup” – “Option Setup” – “Source Delete” (vpage 40). In this case, store them again.

Troubleshooting Information Zone-Multi Control

74