Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

Use uio p to input the “Key” (encryption key) and press

ENTER.

Enter the same encryption key as used for the access point.

[Characters that can be input]

A ~ Z a ~ z 0 ~ 9 ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)

When no security settings have been used in the Internet connection settings, this step is not necessary.

r When encryption is by “WEP”, select the “Default Key” using i, and then press o p.

[Selectable items]

1

 

2

 

3

 

4

Select the same default key as used for the access point. This should normally be set to “1”.

tUse i to select “Connection” and press ENTER. Network connection starts.

When connection is established with the access point, “Connection completed.” is displayed.

AVR-5308CI performs automatic network setup due to the DHCP function.

When connecting to a network that has no DHCP function, perform the setting in step 4.

nManual settings

qSelect “Detail”.

wSelect the communication mode. Example) Infrastructure

 

 

 

 

 

 

 

 

 

 

 

 

e Input the SSID.

r Select the

 

 

 

 

 

 

 

 

 

encryption method.

 

 

 

 

Example) WEP

 

 

 

 

 

 

 

 

t Enter encryption key.

 

 

 

 

 

 

 

 

 

 

y Set only

 

 

 

during “WEP”

u Select “Connection”.

 

in step r.

 

 

 

 

qSelect “Detail” and press ENTER.

wUse o p to select the Mode and press i.

[Selectable items]

Infrastructure : Select when communication is via an access point.

Ad-hoc : Select during direct communication, when an access point is not used.

eUse uio p to input the name of the wireless network (SSID) and press ENTER.

[Characters that can be input]

A ~ Z a ~ z 0 ~ 9 ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)

rUse ui to select the Security and press i.

[Selectable items] None :

Select if not encrypted.

Can also be used even without encryption, through we recommend encryption for improved security.

WEP WPA-PSK(TKIP) WPA-PSK(AES) WPA2-PSK(TKIP)

WPA2-PSK(AES) :

Select the encryption method according to the encryption setting of the access point you are using.

t Use uio p to input the “Key” (encryption key) and press

ENTER.

Enter the same encryption key as used for the access point.

[Characters that can be input]

A ~ Z a ~ z 0 ~ 9 ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)

When no security settings have been used in the Internet connection settings, this step is not necessary.

y When encryption is by “WEP”, select the “Default Key” using i, and then press o p.

[Selectable items]

1

 

2

 

3

 

4

Select the same default key as used for the access point. This should normally be set to “1”.

uUse i to select “Connection” and press ENTER. Network connection starts.

When connection is established with the access point, “Connection completed.” is displayed.

AVR-5308CI performs automatic network setup due to the DHCP function.

When connecting to a network that has no DHCP function, perform the setting in step 4.

37