•Please set all THX Certified speakers, set the “Speaker Configuration” for all speakers to “Small”. We recommend using with the crossover frequency set to “FIXED–THX–”, but depending on the speaker, setting it to a different frequency may improve frequency response near the crossover frequency.

•The “Crossover Frequency” can be set when there are speakers that have been set to “Small” at GUI menu “Speaker Configuration”

– “Speaker Configuration” or when “Subwoofer” is set to “Yes” (vpage 30).

•At the “Advanced” settings, if the GUI menu “Subwoofer Setup” (vpage 30) setting is set to “LFE–THX–”, speakers for which “Speaker Configuration” is set to “Small” can be set. If set to “LFE+Main”, the setting can be made regardless of the speaker size.

•For speakers set to “Small”, sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers.

BGC (Boundary Gain Compensation)

Adjust the bass volume when it feels too strong.

[Selectable items]

ON

 

OFF

•If the bass sound seems too strong:

Set “BGC” to “ON”. This activates a filter that gently reduces very deep bass below 55 Hz to provide the flattest overall deep bass response. Select “ON” or “OFF” according to how strong you prefer the deep bass response to be.

•This can be set when the “THX Ultra2 Subwoofer” setting is set to “Yes”.

SB Speaker Position

Set the distance between the left and right surround back speakers.

[Selectable items] Under 1ft 1ft – 4ft Over 4ft

THX/DOLBY Game

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

WIDE SCREEN

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

7CH STEREO

[Selectable items]

A

 

B

 

A+B

DSP SIMULATION

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

MULTI CH MODE

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

Remote Playback Setup Connections Started Getting

hTHX Audio Setup

Set the speaker to play the optimal THX surround mode.

THX Ultra2 Subwoofer

Set when using a subwoofer compatible with THX Ultra2 standards or a subwoofer that can be properly played at low range.

•When two surround back speakers have been set in “Speaker Configuration” (vpage 30), set the distance of the speakers. This option is not available when “1spkr” is selected.

•This setting is necessary to achieve the optimum effect in the THX Surround EX, THX Ultra2 Cinema, THX Music mode and THX Games mode.

Operating from the main remote control unit

Press the SPKR button.

Surround A Surround B

Surround A+B

Zone-Multi Control

[Selectable items]

Yes

 

No

 

 

 

 

Make these settings when “Yes” is selected for the subwoofer in the “Speaker Configuration” settings. This option is not available when “No” is selected (vpage 30).

jSurround Speaker

Select surround speakers to use for each surround mode.

THX/DOLBY/DTS Cinema

[Selectable items]

A

 

B

 

A+B

 

 

 

 

 

 

THX/DOLBY/DTS Music

[Selectable items]

A

 

B

 

A+B

•This can be set when GUI menu “Speaker Configuration” – “Surround A” and “Surround B” are used (vpage 30).

•When using the pre-out connectors, select and use either “Surround A” or “Surround B”.

•Make the surround speaker settings when the input mode is set to “EXT. IN” at GUI menu “Manual Setup” – “Audio Setup” – “EXT. IN Setup” (vpage 34).

About Speaker Type Setting when Using Both Surround speakers A and B

If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B.

Troubleshooting Information

32