SOURCE SELECT <PHONES> MASTER VOLUME
<ON/STANDBY> <POWER>
[
AMP] 
[POWER ON] 
[POWER OFF]
[MUTE] 
MASTER VOLUME SOURCE SELECT 
About the button names in these explanations
<> : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
Playback
Preparations
Turning the Power On
1Press <POWER>.
The power indicator lights red and the power is set to the standby mode.
2Press <ON/STANDBY> or [POWER ON].
The power indicator flashes green and the power turns on.
To operate the
Turning the Power Off
qPress <ON/STANDBY> or [POWER OFF].
The power is set to the standby mode. wPress <POWER>.
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of time or when traveling, either press <POWER> to turn off the power,
or unplug the power cord from the power outlet.
Operations During Playback
Adjusting the Master Volume
Either turn <MASTER VOLUME> or press [MASTER VOLUME].
Turning Off the Sound Temporarily (Muting)
Press [MUTE].
To cancel, press [MUTE] again. Muting can also be canceled by adjusting the master volume.
Listening with Headphones
Plug the headphones into <PHONES>.
The sound from the speakers and
NOTE
Be careful not to set the volume too high when using headphones.
Playing Video and Audio Equipment
Basic Operation
1Prepare the equipment.
qLoad the DVD, CD or other software in the player.
(vSee the operating instructions of the respective devices.) wTo play a video device, switch the monitor input.
(vSee the monitor’s operating instructions.)
2To operate using the main remote control unit, set the remote control unit to the AMP mode.
(vpage 76 “Remote Control Unit Operations”)
3Use SOURCE SELECT to select the input source.
: “Source Select” (vpage 43, 44)
4Start playback.
(vSee the operating instructions of the respective devices.)
Troubleshooting Information