Zone-Multi Control Remote Playback Setup Connections Started Getting

gVideo

Setting the video source.

Video Select

Switch video input source while listening to audio signal.

[Selectable items]

DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX

SOURCE

Operating from the main unit

Press the VIDEO SELECT button, then turn the SOURCE SELECT knob

until the desired picture appears.

b To cancel, press the main unit’s VIDEO SELECT button, then turn the main unit’s SOURCE SELECT knob and select “SOURCE”.

NOTE

•It is not possible to select HDMI input signals.

•When playing HDMI video input signals, the analog video signal of another input source cannot be selected for the HDMI video output.

•Input sources for which “Delete” is selected at “Source Delete” cannot be selected.

i/p Scaler

Make settings for i/p scaler function.

[Selectable items] A to H A to H & H to H OFF

•This can not be set when “Video Convert“ is set to “OFF”.

•The “A to H & H to H” can be set to the input source assigned to the HDMI input connector.

•“A to H & H to H” setting:

•Deep color (10 bit/12 bit) signals are converted into 8-bit signals.

•The i/p scaler function does not work if xvYCC or computer’s resolution signals are input.

Resolution

Make settings for resolution of HDMI video output signal.

[Selectable items] Auto 480p/576p 1080i 720p 1080p

Operating from the main unit

Press the SCALE button.

Auto 480p / 576p 1080i

1080p 720p

hInput Mode

Make input mode and decode mode settings for this source. The selectable input modes depend on the input source and “Assign” setting (vpage 46, 47).

Input Mode

Set the input mode for this source.

 

 

 

 

(

 

)

[Input source]

TUNER

PHONO

iPod

 

 

 

 

[Selectable items]

Analog

 

EXT. IN

 

 

 

 

 

 

 

 

[Input source] NET/USB XM HD Radio [Selectable items] Auto EXT. IN

[Input source]

CD DVD HDP TV/CBL SAT VCR DVR-1 DVR-2

V.AUX

[Selectable items]

Auto HDMI Digital Analog EXT. IN

Troubleshooting Information

Video Convert

Automatically convert video input signal to monitor output format.

[Input source]

DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX

[Selectable items]

ON

 

OFF

NOTE

•For optimum video performance, THX recommends that you set the conversion mode to “OFF” to use video signals pass through system without up conversion.

Example: The video input signals from the component video can be enjoyed through the video output signals from the component video.

•When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. If this happens, please set the conversion mode to “OFF”.

•This can be set when “i/p Scaler” is set to anything other than “OFF”.

•When the “i/p Scaler” is set to “A to H & H to H”, the resolutions can be setup to the analog video input signal and HDMI input signal.

Progressive Mode

Select optimum progressive mode for video material.

[Selectable items] Auto Video1 Video2

This can be set when “i/p Scaler” is set to anything other than “OFF”.

Aspect

This sets the aspect ratio when outputting 480i/576i or 480p/576p input signals from the HDMI output connector.

[Selectable items] Full Normal

This can be set when “i/p Scaler” is set to anything other than “OFF”.

•When a digital signal is properly input, the “” indicator lights on the display. If the “” indicator does not light, check the digital input connector assignment and the connections.

•The surround mode cannot be set if the input mode is set to “EXT. IN”.

Operating from the main unit or main remote control unit

Press the INPUT MODE button on the main unit or the INPUT button on the main remote control unit.

Auto HDMI Digital

EXT. IN Analog

z1: This can be selected for input sources for which the GUI menu “Assign” setting is set to “HDMI” (vpage 46). Excluding CD.

z2: This can be selected for input sources for which the GUI menu “Assign” setting is set to “Digital” (vpage 46).

45