Basic Operation
1Either turn <SOURCE SELECT> or press [DTU] (AMP mode) to select “HD Radio”.
: “Source Select” (vpage 43, 44)
2To operate using the main remote control unit, set the
remote control unit to the NET/DTU (
) mode.
(vpage 76 “Remote Control Unit Operations”)
3Press [BAND] to select “FM” or “AM”.
4Tune in the desired broadcast station.
qTo tune in automatically (AutoTuning)
Press [MODE] to select “HD Auto” or “Auto”, then use [d f] to select the station you want to hear.
•The “
” indicator lights on the display when an HD Radio station is tuned in.
•When “HD Auto” (tuning mode) is selected, only HD Radio stations are tuned in.
•If “Auto” (tuning mode) is selected, both HD Radio and analog stations are tuned in.
wTo tune in manually (ManualTuning)
Press [MODE] to select “Manual”, then use [d f].
•It is also possible to switch to “FM” or “AM” at step 1 by pressing
[DTU].
•If the desired station cannot be tuned in with auto tuning, tune it in manually.
•When tuning in stations manually, press and hold [d f] to change frequencies continuously.
•HD Radio stations can be preset using the same procedure as for FM/AM stations (vpage 57, 58 “Presetting Radio Stations (Preset Memory)” and “Listening to Preset Stations”). In addition, with HD Radio technology, multicasts can also be preset.
•The time for which the GUI menu is displayed can be set at GUI menu “Manual Setup” – “Option Setup” – “GUI” – “Tuner” (vpage 40).
Selecting Audio Programs
An HD Radio broadcast includes up to 8 audio programs (HD1 to HD8 and Analog). The different audio programs also have data programs.
Press [SEARCH] or uito select the audio program.
If the station you are listening to has multiple audio programs, “HD1” is indicated on the display. If it only has one audio program, “HD” is indicated.
If an audio program from HD2 to HD8 has been interrupted, HD1 is automatically selected after about 20 seconds.
Check the HD Radio Reception
Information
Press <STATUS> while an HD Radio broadcast is being received.
The current reception information is shown on the display.
qNormal
↓
wFrequency / Signal strength
↓
eLong station name / Program and Program type
↓
rTitle name / Artist name
↓
tAlbum name / Genre name
NOTE
If the station signal weakens while receiving a digital broadcast (while “
” and text is displayed), the mode automatically switches to the analog reception mode (the reception frequency is displayed).
Because of this, the “
” indicator and text may flicker if the station signal level is weak and unstable.
nDefault settings
|
| Tuner presets | |
A1 | ~ A8 | 87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /100.1 MHz | |
B1 | ~ B8 | 101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 / 90.1 | |
MHz | |||
|
| ||
C1 | ~ C8 | 530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 / 1710 kHz | |
D1 | ~ D8 | 90.1 MHz | |
E1 | ~ E8 | 90.1 MHz | |
F1 | ~ F8 | 90.1 MHz | |
G1 | ~ G8 | 90.1 MHz |
Troubleshooting Information