When playing still picture (JPEG) files, tracks can also be selected

using the operation described below.

During playback, either press [d] (previous file) or [f] (next file).

If the USB memory device is divided into multiple partitions, only the top partition can be selected.

The AVR-5308CI is compatible with MP3 files conforming to “MPEG- 1 Audio Layer-3” standards.

When [USB] is pressed, playback starts from the first track on the USB memory device.

NOTE

The AVR-5308CI is equipped with two USB ports, one each on the front and rear panels. It is not possible to use the set with USB memory devices connected to both the ports at the same time. Select the USB port you want to use at the “Source Select” – “NET/ USB” – “Playback Mode” – “USB Select” menu.

DENON will accept no responsibility whatsoever for any loss or damage to data on USB memory devices when using the USB memory device connected to the AVR-5308CI.

USB memory devices will not work via a USB hub.

DENON does not guarantee that all USB memory devices will operate or receive power. When using a USB connection type portable hard disk of the type for which power can be supplied by connecting an AC adapter, we recommend using the AC adapter.

It is not possible to connect and use a computer via the AVR-5308CI’s USB port using a USB cable.

The AVR-5308CI is not compatible with the iPod shuffle.

Listening to Rhapsody

Preparations

1Use ui to select “Rhapsody”, then press ENTER or p.

2Use ui to select “I have a Rhapsody account” or “Start 30-day free trial”, then press ENTER or p.

3q When selecting “I have a Rhapsody account” Enter Username and Password.

Select “OK”, then press ENTER.

wWhen selecting “Start 30-day free trial” Select “Accept” then press ENTER.

bTo cancel, select “Reject”, then press ENTER.

n Username :

[Input characters] a ~ z A ~ Z 0 ~ 9

! “ # $ % & ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { } ˜ (space)

n Password :

[Input characters] a ~ z A ~ Z 0 ~ 9

! “ # $ % & ( ) * + , - . / : ; < = > ? @ [ \ ] ^ ` { } ˜ (space)

NOTE

The password should be no longer than 99 characters.

The password may not contain underscores ( _ ).

Search From Rhapsody Latest Information

1Use ui to select “Rhapsody Music Guide”, then press ENTER or p.

2Use uito select the information for track selection, then press ENTER or p.

After selecting, the information is displayed.

3Use uito select the track, then press ENTER or p.

Enter a Character Search For the Track You Want to Listen to

1Use uito select “Search”, then press ENTER or p.

2Use ui to select the search item, then press ENTER or p.

The search display appears.

b You can search by artist name, album name or track name.

3Enter the characters, then press ENTER.

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

68