ENGLISH

6ADVANCED CD PLAYBACK

(7)Playing specific tracks in a specific order

4.Press the PLAY (1) button y.

• The character display changes as follows :

[Before change]

[After change]

(1) Playing a specific track(Direct search)

1.Use the number buttons !3and the +10 button !4 to input the number of the desired track.

For example, to play track number 4, press ,

and to play track number 12, press and

.

Playback will begin from that track.

(2)Advancing to the next track during playback(Automatic search)

1.Press the 9 button !0during playback.

The pickup will advance to the beginning of the next track and playback will continue.

Pressing the button several times will forward the pickup to the corresponding number tracks.

(3)Returning to the beginning of the current track during playback

(Automatic search)

1.Press the 8 button o during playback.

The pickup will return to the beginning of the current track and playback will continue. Pressing the button several times will return the pickup to the corresponding number tracks.

(4) Audible quick search(Manual search)

Using this function, you can search for a desired point quickly with in a track in the both forward or reverse direction.

Release the search button (6or 7) !1!2when the desired point has been reached. Normal playback then continues.

When a search button (6or 7) !1!2is pressed during the pause mode and the button is released, the pause mode is set at that point with the sound being output.

2Manual search forward

1.Press the search button (forward) (7) !2during playback.

Playback of the track is sped up.

2Manual search in reverse

1.Press the search button (reverse) (6) !1during playback.

Reverse playback of the track is sped up.

(5) Playing in random order(Random play)

With this function, the tracks recorded on the disc can be played in a completely random order.

When the RANDOM button !8 is pressed, the “RAND” indicator lights and random play begins automatically.

If the RANDOM button !8is pressed when the repeat function is set, the tracks will be played through once in random order, then played through again in a different order, etc..

NOTE:

The random play mode cannot be set while in the play mode or the program mode.

(6)Repeating playback of a desired interval(Single track repeat)

1.Set the play mode to the single play mode. (Preset function)

2.Press the REPEAT button !9.

The “REPEAT 1” indicators light on the display and the single track repeat mode is set.

3.Use the automatic search buttons (8and 9) o !0to select the track to be played repeatedly.

4.Press the PLAY button (1) y.

Playback starts.

Once the selected track ends, it is played again from the beginning.

The single track repeat mode can also be set by pressing the REPEAT button !9during playback. The current track is played repeatedly.

To cancel the single track repeat mode, press the REPEAT button !9 repeatedly until the “REPEAT 1” indicator turns off.

(All track repeat)

1.Set the play mode to the continuous play mode. (Preset function)

2.Press the REPEAT button !9.

The “REPEAT” indicators light on the display and the all track repeat mode is set.

3.Press the PLAY button (1) y.

The disc is played repeatedly.

The all track repeat mode can also be set by pressing the REPEAT button !9during playback.

If the REPEAT button !9 is pressed during programmed playback, the tracks are played repeatedly in the programmed order.

To cancel the all track repeat mode, press the REPEAT button !9 repeatedly until the “REPEAT” indicator turns off.

(Programmed play)

With this function, you can choose any of the tracks on the disc and program them to play in any order.

Programming is possible when the disc holder is open.

Up to 99 tracks can be programmed.

2Programming

Programming is possible when the CD is in the stop mode.

1.Press the PROG./DIRECT button !7so that the “PROG” indicator lights, then use the number buttons !3and the +10 button !4to program the tracks.

• For example, to program track 3, 12, and 7,

press , , , and .

Each time a track is programmed, the number of that track is displayed on the track number display, and the total program time is displayed on the time display. If the total program time exceeds 99 minutes, only the first two digits of the minutes are display. (The third and / or fourth digits are not displayed.)

01--00m00s appears on the time display if the PROG./DIRECT button !7 is pressed when no program is set.

Full” appears on the time display if you attempt to program more than 99 tracks.

2Playing the programmed tracks

1.Press the PLAY (1) button y to play the tracks in the programmed order.

01:**Tr”, ”02:**Tr”, etc., appears on the time display when tracks are selected with the 8 or 9 button o !0.

2Clearing the program

1.The entire program is cleared when the PROG./DIRECT button !7is pressed again. The program is also cleared when the OPEN/CLOSE button w is pressed.

2Presetting program

• Programs can be stored in the preset memory. When a disc for which a program is preset is loaded, the programmed playback mode is set automatically.

• Programs can be stored for up to three discs.

1.Follow the instructions under “Programming” to input the program.

2.Follow the instructions under “(2) Presetting Procedure” to set the preset mode. (See Page 13.)

3.Press the 8or 9button o !0to select “02:Prg1” (or “03:Prg2” or “04:Prg3”).

Prg1 OFF ⇒ Prg1 ON

Prg2 OFF ⇒ Prg2 ON

Prg3 OFF ⇒ Prg3 ON

5.Press the STOP (2) button u.

The preset setting mode is canceled and the set return to the normal mode.

To play a preset disc :

Load a disc for which a program is preset.

6.Press the PLAY (1) button y.

NOTES:

Programming is not possible with the disc holder open.

During programmed playback, tracks not in the program can be played by pressing number buttons !3and !4.

(8) Editing the program(Call)

When tracks have been programmed, they can be called and displayed on the time display.

1.When the 6 or 7 button !1!2is pressed, the programmed track is selected.

The displayed track can be cleared from the program by pressing the 0/CLEAR button !3 twice at this time. In addition, if a number button !3is pressed, the track corresponding to that number is inserted in the program before the displayed track.

If a track is inserted when there are already 99 tracks in the program, the last track in the program is cleared.

(9) Playing at a different pitch(PITCH)

1.Press the CD pitch control + and – button !5!6to set the playing pitch.

Playback begins at the set pitch, and the “PITCH%” indicator lights.

NOTE:

When the play speed is changed, the sampling frequency of the digital output signal also changes, so it may not be possible to receive digital signals.

9