Digi DC-190 installation manual Introduction

1.0Introduction

The DC-190 Ultra Count counting scale offers practical solutions for a full range of precision counting applications. Models with an internally mounted load cell are available in capacities of 1.0 to 100 pounds. Models with external platforms are available in capacities of 1.0 to 50,000 pounds. An ultra-high-resolution force balance can also be used as a sample scale.

Features include 200 item code storage, over/under weight and quantity checking capability based on programmable

setpoints, and an optional internal battery for standalone applications. The enhanced DC-190 Ultra Count software provides features not found in the standard DC-190 counting scale, including:

•Separate tare registers for each channel

•Selectable fields for RS-232 output

•32-character ID Code, part name, and lot number fields

•32-character operator identification can be held through ID Code changes (SPEC-selectable)

•Teraoka Code and numeric input without SPEC change

•Supports unit weight per piece and unit weight per 1000 (SPEC-selectable)

•Supports CR or CR/LF delimiter

•Supports output on stable (SPEC-selectable), output on stable and ≥ setpoint, output on stable and in target window (over/under) or not in target window (SPEC-selectable)

•Supports simultaneous connection to two printers

•Eltron 27xx series printers can use downloaded label format or fixed format installed in 190

•Code 128 support for Eltron and BCP-30 printers

•BCP-300 company name output can be edited or removed.

•Full barboard support

Trademark Note: Eltron® and Zebra® are registered trademarks of Zebra Technologies Corporation. Epson® is a registered trademark of Seiko Epson Corporation. PSC® and QuickScan® are registered trademarks of PSC Inc.