Performing the QAM Frequency Scan
5. Select the Scan option.
While scanning, the receiver displays the QAM Frequency Scan Progress screen. The scan can take a few minutes.
Note: The receiver creates a table of available satellite transponders with the corresponding QAM frequencies. This table is required for correct operations.
The receiver will again display the QAM Frequency Scan and Signal
Strength screen.
Observe that the signal strength bar is now green and displays the word
Locked.
6.To see the completed scan, select the Scan Results button. The receiver displays the QAM Frequency Scan Results screen.
Page 17
