Chapter 1
Introduction
Tip: Channels that appear in red cannot be viewed because they are not part of your subscription. You can add channels to your subscrip- tion simply by calling the Com- mercial Cus- tomer Service Center at
If You Need More Assistance
If you need help after you read this guide, call your network operator or the Commercial Customer Service Center at
Quick Start Guide
After your system has been installed, order and watch your programming using the following steps:
Ordering Your Programming
1.Using your remote control, press SAT, and then press the blank POWER button. Make sure the TV is also on.
2.Press GUIDE. You will see that some channels in the Program Guide appear in white. These channels can be viewed immediately. However, many channels will be in red. You cannot view these channels until you order programming.
3.Display the Important System Information screen by pressing the SYS INFO button on your remote.
Note: The screen shown here is just an example. The screen that you will actually see will contain numbers and information unique to your receiver.
4.Call the Commercial Customer Service Center at
5.Choose a package and the representative will authorize your programming.
Page 2
