12
SETTING UPTOPASS SATELLITEPROGRAMMING THROUGH YOURVCR TOYOUR TV
If you want to installa V CR betweenyour satellite
receiverand your TV, follow these instructionsto set up
your system andyour remotec ontrolto switch your
systemto watch satellite programming through your VCR
when you press .
Note: The remote control setup forthe VCR is only to
allow the to pass satellite programming throughyour
VCR.This remote control does not provide any buttons to
controlstandard VCR functions.
The first thingyou will do is make the right connections
between yoursatellite receiver, VCR, and TV.After that,
you will set up yourr emotecontrol. Before you can do
theseinstructions, you must first complete Setting Up
to Switchthe TV to WatchSatellite Programming on
page 3.
10.Release . lightf lashes.
11.Pr ess .
12.Press the MUTE button while watching the
light.
13.If the lightflashes three times, go to step14. If
doesnotflashatall,gobacktostep9.
14.Press tomakesure your TV tunes to the off-air
TV channelyou wanted.
TV
TV
TV
TV