
23
HOW TO USE THE REMOTE CONTROLThis sectiondescribes how to use your DISH Network
Remote Control.Figure 1 on page iv shows the remote
controlwith a brief descriptionof the buttons.
POINTING THE REMOTE CONTROL
The remote controluses infrared (IR) light signals to
controlthe satellite receiver and TV. IR signals travel
about 40 feetor less and cannot go through walls or other
solidobjects. To operate a device, you must point the
remotec ontrol at the device, with no objects in the way.
USING THE REMOTE CONTROL FOR SATELLITE TV
PROGRAMMING
SATELLITE CHANNEL CONTROL BUTTON
Touse the remote control to get satellite TV programming
andoperate the satellite receiver, you must first press ,
which will do threethings:
•Turnson the satellite receiver.
•Tunesyour TV to the channel (3 or 4) you use to
watch satelliteTV programming(this function only
works if you have completedthe instructionsin
Setting Up to Switch the TV to Watch Satellite
Programmingon page 3).
•Makes the remote controlbuttons work as described
below to supportwa tchingsatellite TV programming.
SATPOWER BUTTON
Press the SAT POWER button to turn the satellite receiver
ON or OFF.
SAT