22
HOW TO REMOVE TV CODES
If you decide to changethe TV you are using with the
remotec ontrol,it is a good idea to remove the TV code
from the remote.
HOW TO REMOVE VCR CODES
If you decide to changethe VCR you areusing with the
remotec ontrol,it is a good idea to remove the VCR code
from the remote.
1. Press and hold until lightsturn on (it
takes about five seconds).
2. Release . lightflashes.
3. Press . stayson.
4. Enter 9-9-9-9 with the keypad.
5. Press the MUTE button.
6. The lightwill flash three times.
The TV code is now cleared from the rem ote
control’smemory. The TV channel also is reset
backto “0-3” for the next time you set up a new TV
code in yourremote control.
1. Press and hold until lightsturn on (it
takes about five seconds).
2. Release . lightflashes.
3. Press the RECALL button. stayson.
4. Enter 9-9-9-9 with the keypad.
5. Press the MUTE button.
6. The lightwill flash three times.
TheVCR code is now cleared from the remote
control’smemory. The VCR channel also is reset
back to “0-3” for thenext time you set up a new
VCR code in yourremote control.
SAT TV
TV
TV TV
TV
SAT TV
TV
TV
TV