7
7. Set the switch on theba ckof thesatellite
receiver to CH4. The TV will lose the picturefrom
the satellitereceiver, but this is OK.
Note:I f your satellitereceiver does not have a
switch, seeyour satellite receiver’s User’sGuide
forhow to set TV Set Out on the satellite receiver to
channel 4.
8. Press and hold until both lightsturn
on (it takes aboutfive seconds).
9. Release . light will flash.
10.Enter 0-4.
11.Pr ess MUTE while watching light.
12. lightwill flash three times.
If the light doesnot flash at all, repeat this
procedure startingwith step 8.
13.Press whilewatching your TV. If your TV
tunes to Channel4, go to step 14.If not, go to
step 7.
14.Press the MENU button. If you seethe satellite
receiver Menu screen, check the boxbelow and go
to step 28.
4
15. Answer the questionsin Table 1. The information
you provide isw hat you will useto teach your
remote controlto change the channel on your TV
correctly.
SAT TV
SAT
SAT
SAT