19
OTHER REMOTE CONTROL INSTRUCTIONS
HOW TO SCAN FOR TV CODES
If thecode for your TV is not in the TV Codes tables
startingon page 30, complete the following instructions to
scan for your TV’scode.
1. Make sure yourTV is on.
2. Hold until lights turnon (it takes
about five seconds).
3. Release . light flashes.
4. Press . light stays on.
5. Press or untilthe TVturns OFF. You
will haveto do this repeatedly to scan through all
codes.
Note:I f flasheseight times, you have tried
every codein the remote control.
6. Press the MUTE to finish programmingthe remote
control.The light will flash three times.
7. Turnyour TV back on by pressing again and
trythe other buttons below to make sure they work.
•Press the 0through 9buttons to changechannels
on yourTV.
•Press and tochange channelson
your TV.
•Press to change the TV volume.
If the buttons work, you have found the correct
codefor your TV and you may want to go to page 6
tose t up .If the buttons do not work, go back to
step 2 to find another code.
SAT TV
TV
TV TV
TV
TV
TV
VOLVOL