
15
SETTING UPONYOUR REMOTE CONTROL
8. If light flashesthree times, the code is valid
andyou can go to step 9. If light does not flash
at all,the code may not have been entered
correctly.So, start over from step 3 andtry the code
again.
9. Press while lookingat the channel number
display on your VCR. If the VCR is trying to
change channelsto the channel you wrote in step 2
on page 13, go on to the next sectionto set up
for your VCR. If not, pick another code for your
VCR brand from the VCR code tables and go back
to step 3.
Note:The way your VCR displays channel numbers
may differfrom the description above. See the
User’sGuide that came with your VC R form ore
information.
Ifyou have tried all of the codes and none work, go
to How to Scan for VCR Codes on page 20.
1. Make sureyour satellite receiver, VCR, and TV are
connectedand yourremote control is set up to
controlyour VCRusing the instructions in the
previoussections.
2. Turnon your VCR and tune your VCR to a channel
other than 3 or 4 (for example,5).
3. Press to turn onyour TV.
4. Press . Make sure yourVCR tunes to either
Channel 3 or 4.
5. Press the MENU button.If you see the satellite
receiver Menu screen, go to step 26. If not, go to
step 6.
TV
TV
TV