Dish Network EZ Remote RECEIVER UPGRADE, SETTING UPTOSWITCH THE TV TO WATCH SATELLITEPROGRAMMING

3
RECEIVER UPGRADE
Turnon your TV the way you normally would to watch
satelliteTV programming. Using your DISH Network EZ
Remote Control,press and thentry usingthis remote
controlto operate some basic satellite receiver features
like MENU orGUIDE. If the remote control does not work,
your satellitereceiver may need to get an upgrade from
the satellite.To receive this upgrade, turn offyour
satellitereceiver for 20 minutes. After completing the
upgrade,try using the remote control again to make sure it
works.
Note: Check theinside front cover of this guide to see if
the remotecontrol is compatible with your satellite
receiver.
Note:If you are installing the satellite receiver for thef irst
time,you must use the remote control that came with your
receiver to guide the receiver through the installation
procedures,which includes getting the upgrade from the
satellite.
SETTING UPTOSWITCH THE TV TO
WATCH SATELLITEPROGRAMMING
The followinginstructions show you how to set up your
systemand DISH Network EZ RemoteControl so that
when you press the TVgives you satellite
programmingevery time.
The first thingyou will do is make the right connections
between theTV and satellite receiver. After that, you will
setup your remote control to work with your TV and then
set up .