6
SETTING UPONYOUR REM OTE CONTROL
•Press and tochange channels on
your TV.
•Press to change the TV volume.
If these buttonswork, go on to the next section to
set up . If not, pickanother code for your TV
brandfromtheTVCodestableandgobackto
step 3.
1. Make sure yourTV and satellite receiver are
connectedand yourremote control is set up to
controlyour TV using the instructions in the last
two sections.
2. Turnon your TV and tune to a channel other than 3
(forexample, 4 or 5).
3. Press and your satelliter eceiver should turn on
and your TV should tune to Channel3.
4. Press the MENU button.If you see the satellite
receiver Menu screen,gotostep5.Ifnot,goto
step 15.
5. If you want tokeep your satellite programming on
TV Channel 3, check the box below and go to step
28. 3
6. Ifyou prefer to have your satellite programming on
TVChannel4,goontostep7.
VOLVOL