16
6. Writethe number in step 2 from page 13 into the
blankinstep10below.
7. Press and hold the until both lights
turn on (it takesa boutfive seconds).
8. Release and lightwill flash.
9. Press the RECALLbutton.
10.Enter 0- .
11.Pr ess the MUTE button while watching light.
12.If the lightflashes three times, go to
step 13. If lightdoes not flash, go to step 7
and try again.
13.Press .Make sure your VCR tunes tothe
channelinstep10.
14.Press the MENU button. If you seethe satellite
receiver Menu screen, go to step 26. If not, go to
step 15.
15.Answer the questionsin the Table 2. The
informationyou provide is what you will use to
teach yourremote control to change the channel on
your VCR correctly.
SAT TV
SAT
SAT
SAT
SAT