3.5.8 Delete Area Codes
This program sequence deletes area code numbers that have been programmed into the system.
1.Press *24 and enter the
2.Enter the area code reference number (0 through 9) _ then press * (beep).
3.Enter # # # # then press * (beep).
4.Repeat steps 2 and 3 to delete additional area codes.
5.Press 0# TOGETHER to end this programming step (beeeeeep).
3.5.9 Display Phone Numbers (1815, 1817 Systems Only)
Use this programming sequence to display phone numbers programmed under known directory codes, i.e. if you wanted to see what phone number was programmed under directory code 271. This programming sequence will not allow you to delete phone numbers.
1.Press *06 and enter the
2.Enter the directory code (1, 2, 3 or 4 digits depending on what was programmed in 3.5.1) then press * (beep).
3.The phone number programmed under the directory code entered in step 3 will be displayed on the LCD. If C C C C C C C is displayed, this indicates that no phone number has been programmed under the entered directory code. If the first digit is flashing, this is the area code reference code and indicates that the number displayed is a long distance or
4.To display additional phone numbers press * and repeat step 2.
5.Press 0# TOGETHER to end this programming step (beeeeeep).
46
