DKS Enterprises 1803PC, 1815, 1817 owner manual Accessories

6.2 ACCESSORIES

Surface Trim Ring	Use to recess a surface mount unit into a wall or column. P/N 1803-150.
Flush Kit	Use to install flush style units into a wall or column. Kit includes rough in
	back box and trim ring. P/N 1814-165 comes with stainless steel trim
	ring. P/N 1814-166 comes with gold plated trim ring.
Flush Ring	Use to surface mount a flush style unit. P/N 1814-152.
Stainless Steel Case	Replaces the black steel surface mount case with a stainless steel case.
	P/N 1810-102.
Surge Suppressers	High voltage (115 V) suppresser. P/N 1878-076. Phone line
	suppresser. P/N 1878-077. Low voltage (28 V) suppresser. P/N 1878-
	078.
Mounting Post	Heavy-duty goose-neck mounting post with mounting plate. P/N 1200-
	048. Heavy-duty goose-neck mounting post with concrete base plate for
	pad mounting. P/N 1200-047.
Telephone Test Set	Includes clips, cord and carrying case. P/N 1800-050.
Battery	12 volt .8 amp hour gel cell provides stand by power during power
	interruptions. P/N 1801-008.
Tracker Boards	Tracker expansion boards (P/N 2351-010) allow the 1815 / 1817 system
	to operate up to sixteen individual doors or gates, provides door ajar and
	forced entry alarms, and can activate local and building alarm systems.
	Also allows DoorKing gate operators to report gate operator data and
	activity to the entry system.
RS-232 Cable	RS-232 cable with DB-9 connector on one end and wires on the other
	end. Use this cable to program the entry system from a PC using RS-
	232 communications instead of the modem. P/N 1818-040.
Elevator Board	Elevator control boards (P/N 2348-010) provide control of up to four
	elevators, with each elevator having a maximum of 64 floors.

64