Telnet Command Reference Guide V1.1 105
2.23 voip 2.23.1 voip block
This command allows users to block the VoIP number with specified prefix number.
voip block n [-<command><parameter>]
voip block n[…]
Syntax Description
n It means the index number of the VoIP settings.
-<command><parameter> The available commands with parameters are listed below.
-m 0: it means to disable the block mode
-m 1: it means to enable the block mode
-n #: it means the number typed here will be blocked. The
maximum character you can type is 11.
[…] It means that you can type in several commands in one line, e.g.,
-m 1 –n 0204.
Example
> voip block 1 -m 1 -n 0204
> voip block -v
-------index: 1 active------
number: 0204
domain:
interface: 0