2.4.20 ip bandwidth
This command allows users to set maximum bandwidth limit number for the specified IP. ip bandwidth on
ip bandwidth off
ip bandwidth default [tx_rate][rx_rate] ip bandwidth status
ip bandwidth show
ip bandwidth [add/del]
Syntax Description |
|
on | It means to turn on the IP bandwidth limit. |
off | It means to turn off the IP bandwidth limit. |
default [tx_rate][rx_rate] It means to set default tx and rx rate of bandwidth limit. The range is
| from 0 – 65535 Kpbs. |
status | It means to display the current settings. |
show | It means to display all the bandwidth limits settings within the IP |
| range. |
add | It means to add the bandwidth within the IP range. |
del | It means to delete the bandwidth within the IP range. |
It means the range of IP address specified for this command. | |
tx | It means to set transmission rate for bandwidth limit. |
rx | It means to set receiving rate for bandwidth limit. |
Example
>ip bandwidth default 200 800
>ip bandwidth add 192.168.1.50 - 192.168.1.100 10 60 >ip bandwidth status
IP range:
192.168.1.50 – 192.168.1.100 : Tx:10 Rx:60 Current ip Bandwidth limit is turn on
Current default Bandwidth rate is Tx:200 Rx:800 Kbps
26 | Telnet Command Reference Guide V1.1 |
