2.22.5 wl emi (for 2900 series)
This command allows you to wireless settings for emi.
wl emi [mode][ chan][ rate][ pream][ len][ modu][ ant][ loop][cca]
Syntax Description |
|
mode | It means to specify mode with the following number, |
| 0: idle, 3: continue Rx, 4: continue |
chan | It means the channel number(1~13). |
rate | It means the data rate (110=11 Mbps, 540=54 Mbps) |
pream (preamble) | It means the preamble value, 1: short, 0: long. |
len | It means the data frame length. |
modu | It means to specify modulation, 0: disable, 1: enable. |
ant | It means to specify antenna_rx, 0, 1 or 2(diversity). |
loop | It means to enable or disable the power loop, 0: disable, 1: enable. |
cca | It means to specify cca mode, 0: disable, 1:ED, 2:CS. |
Example |
|
>wl emi 4 1 60 0 1514 0 0 1 0 % Your setting is:
% mode=4
% Channel=1 % rate=60
% preamble=0 % length=1514 % modulation=0 % antenna_rx=0 % power_loop=1 % ccamode=0
104 | Telnet Command Reference Guide V1.1 |
