2.21.5 adsl bridge (for 2700 series)
This command can specify a LAN port for mapping to certain PVC, and the mapping port/PVC will be operated in bridge mode.
adsl bridge [pvc_no/status] [on/off/clear] [px ... ]
Syntax Description |
|
pvc_no | It means pvc number and must be between 0(Channel 1) to |
| 7(Channel 8). |
status | It means to shown the whole bridge status. |
on/off | It means to turn on/off bridge mode for the specific channel. |
clear | It means to turn off all the PVC settings. |
px | It means the number of LAN port (x=2~4). Port 1 is locked for NAT. |
Example |
|
support pure bridge mode in PVC y and map it to lan port x (x=2~4).
status | : show whole bridge status. |
pvc_no | : pvc number and it must be between |
on/off | : turn on/off bridge mode for the specific channel. |
clear | : turn off and clear ports. |
ex: adsl bridge 4 on p2 p3 p4
PVC 4 will map to lan port 2/3/4 in bridge mode. > adsl bridge 4 on p2 p3
PVC Bridge p1 p2 p3 p4
4 | ON | 0 | 1 | 1 | 0 |
Telnet Command Reference Guide V1.1 | 91 |
